Diagnostic accuracy of clinical signs to detect erosive tooth wear in its early phase.

BACKGROUND: Agreement exists about most of the clinical features of erosive tooth wear, though no evidence supports their validity in diagnosing the condition. OBJECTIVE: This study aimed to determine the accuracy of clinical signs for diagnosing erosive tooth wear in a young adult general population. METHODS: We conducted a cross-sectional study of dental students. In the first session, two examiners independently determined the presence of erosive tooth wear based on glazed enamel surfaces, morphological changes on non-occlusal surfaces, flattening of convex areas, or any type of concavity. In the second session, one examiner recorded the presence of clinical signs according to the Tooth Wear Evaluation System. The diagnostic accuracy of each clinical sign, both alone and combined, was assessed by calculating their sensitivity and specificity for detecting erosive tooth wear and performing multivariate logistic regression models. RESULTS: Of the 147 participants (78 women and 69 men; median age, 22 years) we included, 76.2% had erosive tooth wear. The single clinical signs with greatest balance between the sensitivity and specificity were 'convex areas flatten' (63% and 71%, respectively) and 'dull surface' (47% and 89%, respectively). Multivariate logistic regression revealed that 'preservation of the enamel cuff' (odds ratio, 22) and the combination of 'smooth silky shining, silky glazed appearance, and dull surface' (odds ratio, 68) had the best predictive values. CONCLUSIONS: The most accurate clinical signs for detecting early erosive tooth wear were dull surface, flattened convex areas and preservation of the enamel cuff.

Clinical and digital assessment of tooth wear.

The aim of this study was to compare the assessment of tooth wear performed on digital models with the one conducted at the clinical examination. Seventy-eight volunteers (29 males and 49 females, age range 20-30 years) with at least 24 teeth, normal oral function, and a neutral transverse relationship were examined. During the clinical examination, dental wear was registered according to the Basic Erosive Wear Examination (BEWE) index. Subsequently, the BEWE index was blindly applied by two examiners on digital models obtained from the volunteers. Data were analyzed using weighted Cohen's kappa coefficient and correlation tests with a confidence interval of 95%. All volunteers showed signs of tooth wear. Anterior teeth showed increased severity of tooth wear than first molars. Early loss of tooth substance could be identified on the digital models, including in areas with challenging direct intraoral visual access. Approximately 50% of the scores based on clinical examination agreed with those based on examination of digital models (k = 0.543, p < 0.01). A moderate, positive correlation was observed between scores registered clinically and on digital models (Spearman's rho = 0.560, p < 0.001). Considering the rather low agreement between the clinical and digital scores, alternatives to using BEWE on digital models are needed.

Tooth Wear Evaluation System 2.0-Evaluation of diagnostic reliability in the assessment of signs and symptoms for tooth wear by non-experts.

BACKGROUND: Tooth wear is a multifactorial condition that manifests through various signs and symptoms. These individual signs and symptoms were described in multiple studies, leading to the inclusion in TWES 2.0 (Tooth Wear Evaluation System 2.0) and the forthcoming DC-TW (Diagnostic Criteria for Tooth Wear). However, a study evaluating their reliability has yet to be conducted. OBJECTIVE: The aim of the study was to examine the reliability in the assessment of 6 signs of pathological tooth wear and 18 clinical signs and symptoms determining aetiology, all of which are included in the TWES 2.0/DC-TW. METHODS: 48 dental students (operators) evaluated patient cases from a patient pool of 14 patients on dental casts and high-resolution intraoral photographs. The agreement between all operators for each sign and symptom was calculated based on ICC (Intraclass Correlation Coefficients). Additionally, the agreement of each operator's evaluation with a predefined sample solution was calculated based on Cohen's kappa. RESULTS: Inter-user agreement ranged from near perfect (0.91) to poor (0.02) for the various pathology signs or aetiology symptoms of tooth wear (mean 0.32). The agreements of the operator's ratings compared to the sample solution resulted in Cohen's kappa from 0.18 to 1 (mean 0.59) for the pathology signs and ranged from 0.02 to 0.51 for the aetiology signs (mean 0.38). CONCLUSIONS: The reliability of the signs and symptoms examined and the ability of individual investigators to correctly identify and assign signs and symptoms varied widely. The current assessment tools for the qualification of tooth wear need further refinement, and examiners need intensive training in tooth wear assessment.

Treatment planning for patients with tooth wear.

Providing restorative dental care for patients with tooth wear can, at times, seem complex and demanding. The key to this process lies in a systematic approach that breaks down the component parts. In this chapter, the importance of a comprehensive assessment at the outset will be highlighted. This should include identification of the patient's chief complaint, taking a thorough history, completing the clinical examination, undertaking any special tests and arriving at clinical diagnoses. Together, this information will influence the treatment planning process, identify appropriate treatment concepts and options available and the individual stages that may be involved. The process should be both holistic and thorough to enable the patient and clinician to build a clear pathway and vision. In parallel, and with patient input throughout, it is essential to manage patient expectations as best as possible whilst remaining pragmatic and honest about treatment outcomes, longevity of restorations and the risks of failure.

Developing diagnostic criteria for tooth wear, a preliminary beta version based on expert opinion, and a narrative literature review.

BACKGROUND: Tooth wear is a multifactorial condition, leading to the irreversible loss of dental hard tissues. The availability of an unambiguous, universally applicable assessment protocol remains lacking. OBJECTIVES: The goal of the authors is to develop a set of diagnostic criteria for the assessment of tooth wear (DC-TW). A two-step approach will be used to achieve this objective: (1) to develop a preliminary beta version of the DC-TW, based on the authors' clinical experience and their shared expertise and supported by a narrative review of the existing literature, and (2) to develop the final DC-TW, with input from a larger group of experts using an international Delphi process. This paper relates to the first step. METHODS: The authors outlined the components that should be incorporated into the DC-TW. The literature search was performed to investigate if their concept was in line with the available literature. The search was conducted to identify eligible publications from inception to July 11, 2022. Two authors independently screened all publications, and differences in judgements were resolved through a consensus procedure. RESULTS: The search yielded 5362 publications, resulting in the final inclusion of 383. These publications were divided into four main topics: (1) nomenclature/taxonomies; (2) self-report tools; (3) clinical assessment tools; and (4) clinical decision-making. CONCLUSIONS: The information from the publications was used and fused with the clinical experience and shared expertise of the authors to contribute to the development of a preliminary beta version of the DC-TW.

Clinical factors to consider in definitive treatment planning for patients with tooth wear.

Diagnosis, disease control and prevention are the precursors to successful definitive restorative treatment of pathological tooth wear. This case series illustrates how proposed key clinical features can influence treatment complexity and provide the clinician with a logical sequence of treatment options for definitive management of tooth wear.

Gastrointestinal conditions related to tooth wear.

Gastro-oesophageal reflux disease (GORD) is a relatively common condition that occurs in adults and less commonly in children. It develops when the reflux of stomach contents into the oesophagus causes troublesome symptoms and/or complications. Signs and symptoms include heartburn, retrosternal discomfort, epigastric pain and hoarseness, dental erosion, chronic cough, burning mouth syndrome, halitosis and laryngitis. A proportion of patients will, however, have silent reflux. Strongly associated risk factors include family history, age, hiatus hernia, obesity and neurological conditions, such as cerebral palsy. There are different treatment options which may be considered for GORD, consisting of conservative, medical and surgical therapy. Dentists should be aware of the symptoms of GORD and dental signs of intrinsic erosion indicative of possible GORD so that they can question patients about this and, if appropriate, initiate a referral to a general medical practitioner.

Managing tooth wear with respect to quality of life: an evidence-based decision on when to intervene.

Patients with more severe forms of tooth wear may require restorative rehabilitation. The decision to commence treatment must be taken carefully and there are a multitude of factors to consider. Alongside the clinical signs and symptoms typically associated with tooth wear, there is also the need to assess the impact of the condition on the patient's oral health-related quality of life. As part of the discussions relating to the attainment of informed consent for the restoration of the worn dentition, not only is it relevant to appropriately appraise the risks, benefits, costs, reasonable alternatives and likely prognosis of the proposed treatments, but to also elaborate on the expected impact of the intervention on the patient's oral health-related quality of life. The aim of this article is to review the evidence relating to the impact of the quality of life with the management of tooth wear, with the introduction of the concept of an evidence-based approach to decision-making when planning care.

The opinions of GDPs on the challenges of managing tooth wear in primary dental care.

As patients access most of their dental care within the primary care setting, it is relevant to consider how the experience and opinions of general dental practitioners (GDPs) influence the diagnosis, monitoring and treatment of their patients with tooth wear. This paper records the agreed outcomes of semi-structured discussions with three experienced GDPs. The aim is to continue the broader debate about how patients with tooth wear currently are and ideally could be managed within the primary care settings in England. The outcomes are also likely to be applicable to other countries, regardless of the local funding models for routine patient care.

Monitoring of erosive tooth wear: what to use and when to use it.

Although we are increasingly recognising the need to assess patients for accelerated rates of tooth wear progression, it is often difficult to do so within a feasible diagnostic window. This paper aims to provide evidence-based timelines which a diagnosing clinician can expect to assess tooth wear progression in study models, clinical indices, clinical photographs and visually with intraoral scans. It also discusses new technologies emerging for the quantitative assessment of tooth wear, timelines for diagnosis, and caveats in the 3D scan registration and analysis process.

Sex-specific reference values for the crown heights of permanent anterior teeth and canines for assessing tooth wear.

OBJECTIVE: We propose sex-specific reference values for the clinical crown height of anterior teeth and canines. MATERIAL AND METHODS: In this cross-sectional study, 1426 teeth were analysed from 169 undergraduate and postgraduate dental students (83 women and 86 men, median age 22 years). Teeth with worn or totally restored incisal edges, or gingival inflammation were excluded. Age, gender and body height were recorded and the degree of tooth wear was scored according to the quantification module of the Tooth Wear Evaluation System. The clinical crown heights of all anterior teeth and canines were measured from the gingival margin to the incisal edge with a digital calliper. Reference values for tooth groups were obtained at the percentiles 10, and expressed by sex if there was a significant difference between men and women. RESULTS: Mean crown heights were bigger in men than in women for each tooth group (p = .028). Clinical crown heights showed sexual dimorphism at the 10th percentiles for all tooth groups except for mandibular anterior teeth. CONCLUSIONS: For assessing tooth wear, the sex-specific reference values for the clinical crown height of young adults Caucasoids range from 7.5 mm to 9.0 mm in women and from 7.5 mm to 9.5 in men.

[Measuring tooth wear with regular intra-oral 3D scanners: for still in the future, or is it already possible?] / Serie: Innovatieve technieken en ontwikkelingen in de mondzorg. Meten van gebitsslijtage met reguliere 3D-scanners: toekomstmuziek, of al mogelijk?

Quantitative tooth wear measurement is a method of increasing importance when measuring tooth wear progression. The Radboud university medical center has developed a protocol that measures height and volumetric differences on regular 3D-scans. Intra-oral scans were made on patients with tooth wear and superimposed. To assess reliability the precision , as well as intra- and inter-rater precision of the protocol was tested. T-tests were performed to determine the structural and random error. Our findings indicate that the method is precise enough to measure height differences in patients with severe tooth wear progression, or tooth wear with an interval longer than 1 year. The method is not precise enough to measure volumetric changes.

Dental Erosion Evaluation with Intact-Tooth Smartphone Application: Preliminary Clinical Results from September 2019 to March 2022.

Dental erosion is a process of deterioration of the dental hard tissue; it is estimated that about 30% of permanent teeth are affected in adolescence. The Intact-Tooth application allows for the better estimation of the problem, inserting itself in the diagnosis process, and better care and prevention for the patient. It provides him with scientifically validated protocols, which the patient can consult at any time. The purpose of this report was to conduct an initial evaluation on the use of the application, which has been available since September 2019: the analysis of the collected data allowed the first investigation of the incidence of the problem and the degree of susceptibility in the registered patients. Photos of 3894 patients with dental erosion were uploaded, through which the degree of susceptibility and the BEWE (basic erosive wear examination index) index could be assessed; of these, 99.72% had a susceptibility grade of 0 to 8, while 0.28% had a medium-high susceptibility grade; this result is related to the age and sex of the patients. The management of patients through the help of the application could promote the diagnosis and treatment of enamel diseases and encourage the self-learning of the learning machine, thanks to the number of clinical cases uploaded.

Agreement between two common tooth wear indices: Guidance on indications for use.

AIM: To assess the level of agreement between the simplified Tooth Wear Index (S-TWI) and the Basic Erosive Tooth Wear Examination (BEWE). METHODS: Data from 477 adult participants in the Adult Dental Health Survey were analysed. They were examined at home using the S-TWI and the BEWE, in that order. Agreement in the highest score at person, segment and sextant levels was measured with Gwek's agreement coefficient. The impact of the threshold used to define tooth wear (any [mild/moderate/severe] vs no wear, moderate/severe vs no/mild wear and severe vs no/mild/moderate wear) on their agreement was also evaluated. RESULTS: The prevalence of any, moderate/severe and severe tooth wear was 93.1%, 36.1% and 4.6% according to the S-TWI and it was 98.9%, 70.9% and 21.4% according to the BEWE, respectively. The agreement in the highest score between both indices was 0.745 (95% CI: 0.715, 0.775) at person level, 0.771 (95% CI: 0.746, 0.796) at the anterior segment level, 0.795 (95% CI: 0.766-0.824) for the upper anterior sextant and 0.905 (95% CI: 0.895-0.915) for the lower anterior sextant. The agreement between indices was higher for any wear than for severe wear at person, segment and sextant level. However, it was the weakest for moderate/severe wear regardless of the assessment level. CONCLUSION: The agreement between indices was high, especially when focusing on specific parts of the mouth (lower anterior teeth) and when using specific thresholds of tooth wear severity (any wear and severe wear). Agreement was constantly low when using the moderate/severe wear threshold. CLINICAL SIGNIFICANCE: When used as an epidemiological tool, the BEWE may report higher levels of tooth wear than the S-TWI. The BEWE may be a better screening tool whereas the S-TWI may be a better tool to use when determining secondary or tertiary care referral.

Tooth Wear Evaluation System (TWES) 2.0-Reliability of diagnosis with and without computer-assisted evaluation.

BACKGROUND: Tooth wear is a multifactorial process, leading to the loss of dental hard tissues. Therefore, it is important to detect the level of tooth wear at an early stage, so monitoring can be initiated. The Tooth Wear Evaluation System (TWES) enables such a multistage diagnosis of tooth wear. The further developed TWES 2.0 contains a complete taxonomy of tooth wear, but its reliability has not yet been validated. OBJECTIVES: The aim of the study was to examine in a randomised controlled trial (RCT) whether diagnoses made based on the TWES 2.0 are reproducible and whether this reproducibility is also achieved with computer-assisted diagnostics. METHODS: 44 dental students received extensive training in TWES 2.0 assessment and taxonomy. The students each evaluated at least 10 (of the present 14) anonymised patient cases using gypsum models and high-resolution intra-oral photographs according to TWES 2.0. One half initially evaluated on paper; the other half used dedicated software (CMDfact / CMDbrux). After half of the patient cases (5), the evaluation methods were switched (AB/BA crossover design). The diagnoses were then evaluated for agreement with the predefined sample solution. RESULTS: Evaluation of agreement with the sample solution according to Cohen's kappa indicated a value of 0.46 for manual (traditional) evaluation; and 0.44 for computer-assisted evaluation. Evaluation of agreement between examiners was 0.38 for manual and 0.48 for computer-assisted evaluation (Fleiss' kappa). CONCLUSION: The results of this study proved that the taxonomy of the TWES 2.0 has acceptable reliability and can thus be used by dentists. Accordingly, the system can be learned quickly even by untrained practitioners. Comparable results are achieved with computer-assisted evaluation.

Tooth Wear in Patients Undergoing Sleep Studies: A Blinded Observational Study.

OBJECTIVES: Obstructive sleep apnea (OSA) is a common health problem that remains an underdiagnosed issue. Screening tools and clinical markers are needed from a variety of providers to determine patients at risk for OSA. Tooth wear could be a good potential identifier of patients at risk of having OSA. METHODS: This is an ambidirectional observational cohort. Participants were identified as retrospectively having undergone a sleep study and then tooth wear data was prospectively collected at patients' annual dental exam. The participants also completed an anonymous questionnaire to determine correlations with possible confounding factors. RESULTS: A total of 107 individuals were included in the analyses. No significant differences in wear were found between participants with an Apnea-Hypopnea Index (AHI) less than 5 and those with AHI ≥ 5 for any of the teeth examined (all P > 0.05). Overall, both groups had median tooth wear scores of 2 (IQR 1). Similarly, no differences in tooth wear were found between participants based on their body mass index (BMI) classification or consumption data (all P > 0.05). CONCLUSION: Sleep is a complicated entity with many possible confounding factors. There is no correlation between AHI and tooth wear in the selected military cohort. Dentists should screen patients for possible medical and dental conditions whenever tooth wear is detected. Further research is needed to determine if tooth wear could be used as a potential identifier of patients at risk for OSA.

Knowledge on and treatment practices of erosive tooth wear among Finnish dentists.

OBJECTIVES: To investigate Finnish dentists' knowledge on and means of recording, detecting and diagnosing erosive tooth wear (ETW). Treatment options and possible differences in treatment decisions between general and specialized dentists were also evaluated. MATERIALS AND METHODS: An electronic questionnaire was sent by e-mail to 3664 Finnish dentists. Respondents' gender, age, work experience, field of specialty, and practice location were requested. The questionnaire also included a patient case where the dentists were asked about their choice of treatment. Statistical analyses were performed using means, proportions, and cross tabulations. RESULTS: Response rate was 24% (n = 866). Almost all respondents (98.0%) recorded ETW in patient files, but only 4.1% used a detailed scoring system. Of the respondents, 64.4% usually found the cause of ETW. Use of carbonated beverages (84.3%), energy drinks (57.0%), and reflux disease (53.1%) were reported to be probable causes. The majority of the respondents (80.9%) usually assessed patient's dietary history while 1.9% evaluated saliva secretion rate. When asked about treatment decisions of ETW patients, the differences between general dentists and specialized dentists were not as obvious as hypothesized. CONCLUSIONS: This study suggests that the Finnish dentists who participated in this survey are able to detect and/or diagnose erosive tooth wear, but there is variation in recording it. The differences in treatment decisions between general dentists and specialized dentists seem to be moderate. The treatment practices for ETW are not established and further research to create clinical guidelines seems to be needed.

Treatment of Tooth Wear Associated with Reduced Occlusal Vertical Dimension Using Direct Composite Restorations and a Removable Prosthesis.

Tooth wear is increasing in prevalence within the United Kingdom. Treatment of tooth surface loss can be daunting for both the clinician and patient. However, use of additive resin composite restorations is a minimally invasive treatment modality. This case illustrates the treatment of tooth surface loss in both the maxillary and mandibular arches with direct composites restorations using putty indices generated from a diagnostic wax-up recorded in centric relation. The tooth surface loss had resulted in reduced restorative space on the right hand side. The restorative treatment involved increasing the anterior vertical dimension, enabling the provision of a cobalt-chrome partial denture. This case shows the restoration of form, function and aesthetics using a reorganised occlusal approach.

An Analysis of Electronic Primary Dental Practice Tooth Wear Referrals.

We evaluated the quality of general dental practitioner (GDP) tooth wear (TW) referrals to secondary care services in Kent, Surrey and Sussex.Prospective consecutive referrals received via an electronic pathway were assessed from 1 June to 30 October 2019. Reasons for referral, patient demographics, quality of referral, opinion of the triaging clinician and outcome were assessed.Of 671 referrals, 32% were for TW. Males were referred more commonly (1.7:1.0). The median age was 52. Patients were more likely to be referred from distant locations than places closer to the referral centre (p<0.001). Only 55% of referrals suggested a cause for the TW, 33% provided a clinical photograph and 1% recorded a tooth wear index of any type. Referring clinicians most commonly cited attrition as reason for referral (p<0.001). Those under 40 years were referred for erosion (p=0.001) and those over 40 years, attrition (p=0.019). The triaging clinician was more likely to allocate a tooth wear score of three for those under 40 years and a score of four for over 40 years (p<0.001). 47% of referrals were rejected. Males and referrals with photographs were more likely to be accepted for treatment (p=0.017 and p<0.001, respectively).There is a high demand for specialist TW services. The number of referrals being rejected has not changed using the electronic referral system. We advocate the inclusion of mandatory fields for completion by GDPs as well as compulsory clinical photographs and tooth wear indices (Smith and Knight Tooth Wear Index or a basic erosive wear examination - BEWE index).

Dental microwear texture analysis as a tool for dietary discrimination in elasmobranchs.

As abundant and widespread predators, elasmobranchs play influential roles in food-web dynamics of marine communities. Clearly, these trophic interactions have significant implications for fisheries management and marine conservation, yet elasmobranch diet is relatively understudied; for the majority of species little or no quantitative dietary data exist. This reflects the difficulties of direct observation of feeding and stomach contents analysis in wild elasmobranchs. Here, by quantifying the 3D surface textures that develop on tooth surfaces as a consequence of feeding, we show that tooth microwear varies with diet in elasmobranchs, providing a new tool for dietary analysis. The technique can be applied to small samples and individuals with no gut contents, and thus offers a way to reduce the impact on wild elasmobranch populations of analysing their dietary ecology, especially relevant in conservation of endangered species. Furthermore, because microwear accumulates over longer periods of time, analysis of texture overcomes the 'snapshot bias' of stomach contents analysis. Microwear texture analysis has the potential to be a powerful tool, complementing existing techniques such as stable isotope analysis, for dietary analysis in living and extinct elasmobranchs.